|
CODERS
PM-2 MOTOR DRIVING HOT STAMPING DATE CODER
Description:
PM-2 is an intermittent hot foil coding device for overprinting text onto film such as cellophane, polypropylene, aluminum, polyester or cardboard, at speed up to 90 prints per minute, on a 20x35mm printing area. It can be easily installed on packaging machines with intermittent cycle. With an additional idle bar, installation on machines with continuous motion is also possible. Features:
• Driven by AC motor, no air consumption needed.
• 1 to 3 lines print, easy to adjust.
• Easy to change information.
• Easy to change any printing direction.
• Stable temperature control system.
• Quality and clear print.
• End of ribbon sensor.
• Low cost imprint
Specifications: | Power required: | 220V~240V 50/60Hz, 100W | | Consumable used: | Hot Foil / Ribbon | | Printing area: | 20mmX35mm | | Printing Speed: | 90 prints/min | | Ribbon length: | 100~153m | | Character size: | 3mm | | Signal required: | connect signal, photoelectric sensor or limit switch | | Coder dimension: | 225(H)x226(W)x170(L)mm | | Net Weight: | 10~12 Kg, depends on frame size |
|
