|
CODERS
PE-2 PNEUMATIC DRIVEN HOT STAMPING CODER
Description:
PE-2 is a small, light weight, user friendly hot stamping coder, working by hot stamping method. It is used for overprinting text on paper foil, plastic foil, pharmaceutical paper carton, cellophane, polypropylene, aluminum, polyester or cardboard, at speed up to 150 prints per minute, on a 20x35mm printing area. It can be easily installed on packaging machines with intermittent cycle. With an additional idle bar, installation on machines with continuous motion is also possible.
Features:
- Light weight and easy loading foil.
- 1 to 3 lines print, easy to adjust.
- Easy to change information.
- Easy to change any printing direction.
- Stable built-in temperature control system.
- Easy for installation, thanks to its compact size
- Possibility for working with packaging machines with intermittent or continuous cycle.
- Fully guarded.
- Quality and clear print
- End of ribbon sensor
- Low cost imprint
Specifications:
| Power required | 220V~240V 50/60Hz, 100W | | Air supply | 4Bar (60psi) | Consumable used
| Hot Foil | | Printing area | 20mmX35mm | | Printing Speed | 120 prints/min | | Ribbon length | 100~153m | | Character size | 3mm | | Signal required | connect signal, photoelectric sensor or limit switch | | Coder dimensions | 150(H)x220(W)x150(L)mm | | Net Weight | 9~11 Kg, depends on frame size |
|
